FAQ Keyword Fabric
Back to the Main FAQ How do I remove Rodent Urine and Feces Damage?
I very seldom write a letter like this.
I'm writing to tell you about the excellent success we have had with your product, ATX’s Odorkill & Stain Remover.
It saved the interior of a $120,000 Special Order, 1989 Porsche Sportster, it saved our customer at least $11,200, since he did not have to replace the compete interior.
One of our very good customers had stored his car in a garage for over 2 years. When he removed it, he found that it had been infested with rodents. They had defecated on every square inch of the interior, the carpet, dash and upholstery, and on the inside panel.
The smell of urine and feces even permeated the fabric of the convertible roof. Our clean up shop, cleaned, shampooed and treated the interior with "agent orange" (a citrus cleaner).
We had done this 3 times, but the stench was still the same and just as strong. Now, it had the smell of orange rodent urine. It made everyone who came in contact with it nauseous.
We also tried baking soda, perfumes, and everything else in our shop, but to no avail. We then advised our customer that he must replace the entire interior at an estimated cost of $11,200.
When you came along and suggested that we try ATX’s ODOR KILL & STAIN REMOVER we were dubious. You personally treated the interior one time by spraying and saturating the carpet, the doors, the leather upholstery, the dash panel and the convertible top.
After this one treatment, the horrible mix of stenches was completely eliminated. There was absolutely no residual odor.
My customer was elated at this simple, effective bio-technological low cost solution! I am pleased to be able to recommend ATX’s ODOR KILL & STAIN REMOVER on all of our vehicles.
Thank you for introducing us to this superior product.
Dean Pavia
Hammersley Motors
Lynchburg, VA
How do I remove Blood on fabric Pillow case?
Blood on fabric Pillow case ATX’s Odor kill & Stain remover loves blood.
Generously spray it on in a mix of 10 parts water and 1 part odor kill. Let it soak for 10-15 minutes.
Blot up the excess blood that liquefies.
Spray it on again. Blot up the blood. Spray it again and let it sit for about 30 minutes.
Then put it in the washing machine with mild soap or no soap and about 2 oz of odor kill. This should do the trick. It simply digests the blood.
How do I remove Cat Urine in Mattress / Sofas?
Cat Urine in Mattress / Sofas
Yes, it loves cat urine, but it will take some work. ATX’s Odor-Kill and Stain Remover must get to the source of the problem area in order to digest the "problem causes".
The key is that the mixed solution must come in contact with the urine in order for it to digest the urine. If there is residual urine that could not be reached by Odor Kill, it will not be digested and removed.
So, it will be important to get the solution as deep as possible into the fabric and the urethane foam. Mix it 10 parts water and 1 part odor kill in a clean spray bottle. Generously spray the mattress, top, sides, bottom, and interior.
The enzyme solution is working when it has moisture. It stops working when it dries. Another alternative treatment method: You need to rent a steam cleaner (that injects water under pressure and then sucks it back up). You should mix 10 oz to 15 oz. of ATX’s Odor-Kill and Stain Remover to 1 gallon of warm water in the steam cleaner (this gives about a 1 to 10 ratio of product to water).
Then clean both sides of the mattress with the steam cleaner. If it is possible to get inside the mattress, then clean that also. Let the area alone for a couple of hours and then repeat the process.
If ATX’s Odor-Kill and Stain Remover gets to the source of the problem, then this treatment will solved it. Just as a friendly suggestion, since you will have already rented the steam cleaner, you could clean other carpets in your home with ATX’s Odor-Kill and Stain Remover by using 2 oz. to 1 gallon of warm water (a 1 to 64 ratio).
After drying, vacuum, and check for urine smell. Re apply if necessary. We also have directions on our site, which you can refer to. Yes, we offer a money back guarantee for all situations and applications. See the guarantee below.
How do I remove cigar Smoke?
Odor kill will make a substantial improvement.
We cannot guarantee that the cigar smoke will be totally removed. Here's some tips on how to treat it. ATX’s Odor Kill & Stain Remover works on the PacMan Concept
The key is to get the Odor Kill solution in direct contact with the organic odor & stain molecules. The Odor kill solution of multiple enzyme systems and molecules functions just like little "pacmen," which very aggressively attack and digest the organic matter molecules. The Odor Kill enzyme/molecules must come in contact with the organic matter molecules in order to digest them.
They work in the presence of food (organic matter), oxygen and water. When the area dries, the enzymes cease functioning and cannot be regenerated with water. The mixed solution must come in contact with the cigar smoke molecules in order for it to digest them.
If there is residual smoke molecules that could not be reached by Odor Kill, they will not be digested and removed. So, it will be important to get the solution as deep as possible into the fabric and suede.
Odor Kill will probably take out almost all of the odors by just spraying a damp mist solution (20 parts water and 1 part Odorkill), then hand rub it lightly into the coat, inside and out. So that the solution comes in contacts with as much surface area as possible.
If it doesn't do it completely, and then I would suggest hanging the coat out in an open room, turn on a fan towards the coat, spray the coat and then mist ATX ODOR KILL in front of the fan.
Repeat in another half-hour or so. Please remember that the wet suede may have a smell of its own. Be sure to check for water fastness in a hidden area. This is a water-based solution.
So, if small amounts of water will damage it, then do not use Odor Kill for this application. Trust this helps. You can order directly from us as described below.
How do I remove Diesel Fuel spill on clothing?
Diesel Fuel spill on clothing The key is to get the Odor Kill solution in contact with the diesel odor molecules. Odor kill acts like little "pacmen" which attack and digest the diesel fuel (organic matter).
They work in the presence of food (organic matter), oxygen and water. When the area dries the enzymes die. The solution can be applied at anytime. It is probably best that it be applied after it has been washed in soap and water to remove as much excess diesel as possible.
Or you can apply it directly to the clothing article as soon as the spill occurs. The enzymes will digest the rest of the diesel fuel or any other organic stain or odor.
However, the more diesel fuel contamination on the clothing or other area requires more Odor Kill enzymes to digest the diesel fuel. They can only work so fast.
You can keep a mixture of 10 parts water and 1 part Odor Kill in a trigger spray bottle and use it when a spill occurs or you can use it straight from the bottle. It actually works faster when it is mixed with water since it "wakes up" the enzymes. Check out the testimonial about diesel at our web site. Technology of Odor Kill Check out the section on our web site that discusses the Technology of Odor Kill.
Also, check out the Technical Specs. Section. This is a very unique and powerful product. ATX’s ODOR KILL & Stain Remover contains a combination of mutually antagonistic bioenzyme producing systems, which, through the use of 21st century unique technology, are made to coexist peacefully as long as they are in the original container.
Let them out, and they instantly wake up and go on the attack. Since their methods of attacking a stain or odor are all slightly different, the combined synergistic result is much better than with the use of any single bioenzyme system.
There is nothing else like it on the market! ATX’s ODOR KILL & Stain Remover is the latest development in bioenzyme research. This unusual product was originally developed for industry and government uses, and is the result of 18 years of research and development in 26 countries.
Developed by an industrial engineer / commercial diver who pioneered bio-remediation used for oil spill clean-ups. ATX’s ODOR KILL & Stain Remover is an aggressive biological product, yet it can be used on water-safe fabrics and surfaces.
Unlike other enzyme products that require 8 hours to 24 hours to work, ATX’s ODOR KILL & Stain Remover works immediately. Trust this additional info. helps explain the cleaning process.
How do I remove Human Urine in Mattress?
Human Urine in Mattress
Yes, it definitely works on human urine in mattresses. It will take a little work, but it will be worth it. Here's how: ATX’s Odor Kill & Stain Remover works on the PacMan
Concept The key is to get the Odor Kill solution in direct contact with the organic odor & stain molecules. The Odor kill solution of multiple enzyme systems and molecules functions just like little "pacmen," which very aggressively attack and digest the organic matter molecules. The Odor Kill enzyme/molecules must come in contact with the organic matter molecules in order to digest them.
They work in the presence of food (organic matter), oxygen and water. When the area dries, the enzymes cease functioning and cannot be regenerated with water. The key is that the mixed solution must come in contact with the urine in order for it to digest the urine. If there is residual urine that could not be reached by Odor Kill, it will not be digested and removed.
So, it will be important to get the solution as deep as possible into and under the fabric and the mattress base. Mix it 10 parts water and 1 part odor kill in a clean spray bottle.
Generously spray the mattress, top, sides, bottom, and interior. The enzyme solution is working when it has moisture. It stops working when it dries. If it is possible to get inside the mattress, then clean that also. Let the area alone for a couple of hours and then repeat the process. If ATX’s Odor-Kill and Stain Remover gets to the source of the problem, then this treatment will solved it.
After drying, vacuum, and check for urine smell. Re apply if necessary. We also have directions on our site, which you can refer to.
Yes, we offer a money back guarantee for all situations and applications.
How do I remove Mildew on Camper Canvas?
Mildew on Camper Canvas
Yes, Odor Kill will do the job for you. I will not destroy the canvas or the stitching. It loves to digest mildew. We have directions on our site and we include them with your shipment.
Here are some helpful hints: ATX’s Odor Kill & Stain Remover works on the PacMan Concept The key is to get the Odor Kill solution in direct contact with the organic odor & stain molecules.
The Odor kill solution of multiple enzyme systems and molecules functions just like little "pacmen", which very aggressively attack and digest the organic matter molecules. The Odor Kill enzyme/molecules must come in contact with the organic matter molecules in order to digest them.
They work in the presence of food (organic matter), oxygen and water. When the area dries, the enzymes cease functioning and cannot be regenerated with water. **************************
The key is that the mixed solution must come in contact with the mildew so it can digest the organic mildew and mold. If there is residual mildew that could not be reached by Odor Kill, it will not be digested and removed.
So, it will be important to get the solution as deep as possible on all surfaces.
Mix it 20 parts water and 1 part odor kill in a clean spray bottle. Generously spray it on all water safe surfaces, especially in areas where mold and mildew smell the strongest.
You may wish to rub it in with your hands on canvas, fabrics, drapes, rugs, etc., and let dry slowly. The enzyme solution is working when it has moisture. It stops working when it dries. It will not leave a residual odor.
Let it dry and repeat if necessary the same day. In your situation, ATX’s Odor Kill & stain remover will definitely help reduce and eliminate the mold and mildew smell /odors for a period of time (days) depending on how much continuous humidity is in the area. Some strains of mildew are very, very difficult to totally eliminate.
If you can eliminate the moisture the mold and mildew will die. Open up the camper and let it dry out in the sun after the Odor kill treatment. Retreat as necessary.
If you would like, I'll be glad to speak with you to discuss this further. Just advise the best time to call and your phone #.
How do I remove Mildew stains on Auto Cloth Vinyl Top?
Mildew stains on Auto Cloth Vinyl Top
We have had excellent success with mold and mildew removal. It is hard to say exactly what will happen with your car top. I definitely think it is worth a try. I'd just start with our 8-oz bottle and try it in a hidden spot. Mix it 5 parts water and 1 part odor kill.
Spray it on and use a scrub brush to gently clean the fabric. Let it sit on the fabric and slowly dry. Maybe also put an old clean towel that has been soaked with OK over the spot and let it continue to work. Odor kill works best in a 70-100 degree environment.
It is water based with a neutral pH of 7.0. It uses enzymes to digest the mold and mildew. We offer a money back guarantee, see below. Please let me know your results.
How do I remove Moth ball Odors in a Mattress?
Moth ball Odors in a Mattress
The key is that the mixed solution must come in contact with the mothball molecules in order for it to digest them.
If there is residual mothball molecules that could not be reached by Odor Kill, they will not be digested and removed. So, it will be important to get the solution as deep as possible into the fabric and the urethane foam. Mix it 10 parts water and 1 part odor kill in a clean spray bottle. Generously spray the mattress, top, sides, bottom, and interior.
The enzyme solution is working when it has moisture. It stops working when it dries. Another alternative treatment method:
You need to rent a rug cleaner (that injects water under pressure and then sucks it back up). You should mix 10 oz to 15 oz. of ATX’s Odor-Kill and Stain Remover to 1 gallon of warm water in the rug cleaner (this gives about a 1 to 10 ratio of product to water).
Then clean both sides of the mattress with the steam cleaner. If it is possible to get inside the mattress, then clean that also. Let the area alone for a couple of hours and then repeat the process.
If ATX’s Odor-Kill and Stain Remover gets to the source of the problem, then this treatment will solved it. Just as a friendly suggestion, since you will have already rented the rug cleaner, you could clean other carpets in your home with ATX’s Odor-Kill and Stain Remover by using 2 oz. to 1 gallon of warm water (a 1 to 20 ratio).
After drying, vacuum, and check for mothball smell. Re apply if necessary. We also have directions on our site, which you can refer to. Yes, we offer a money back guarantee for all situations and applications. See the guarantee below.
How do I remove Mothball / Mold and Mildew on Fabrics?
Mothball / Mold and Mildew on Fabrics
Many thanks for your email. Odor Kill will do the job for you. It loves to digest mold and mildew and mothballs.
The key is that the mixed solution must come in contact with the mildew in order to digest it. If there is residual mildew that could not be reached by Odor Kill, it will not be digested and removed.
So, it will be important to get the solution as deep as possible into the fabric. Washing in the washing machine is an excellent way to do this and clean the fabrics.
Mix it 10 parts water and 1 part odor kill in a clean spray bottle or in the washing machine. Wash in the warm water cycle. For items that cannot be easily washed in the washing machine:
Generously spray the article. Then rub it in with your hands and let dry slowly. The enzyme solution is working when it has moisture. It stops working when it dries.
After applying, check for the mildew or offending odor smell. Re apply if necessary.
How do I remove Mothball / Mold and Mildew on Fabrics?
Mothball / Mold and Mildew on Fabrics
Many thanks for your email. Odor Kill will do the job for you. It loves to digest mold and mildew and mothballs.
The key is that the mixed solution must come in contact with the mildew in order to digest it. If there is residual mildew that could not be reached by Odor Kill, it will not be digested and removed.
So, it will be important to get the solution as deep as possible into the fabric. Washing in the washing machine is an excellent way to do this and clean the fabrics.
Mix it 15 parts water and 1 part odor kill in a clean spray bottle or in the washing machine. Wash in the warm water cycle. For items that cannot be easily washed in the washing machine:
Generously spray the article. Then rub it in with your hands and let dry slowly. The enzyme solution is working when it has moisture. It stops working when it dries.
After applying, check for the mildew or offending odor smell. Re apply if necessary. We also have directions on our site, which you can refer to. We include directions in the bottle and with our shipments.
Yes, we offer a money back guarantee for all situations and applications. See the guarantee below. You can order from us as described below.
How do I remove Pet (dog & cat) Urine in carpet?
Pet (dog & cat) Urine in carpet: Yes, Odor Kill will eliminate the urine odors. Just follow the directions: on the bottle, that are included and are on our web site. Yes, it loves urine, but it will take some work.
ATX’s Odor-Kill and Stain Remover must get to the source of the problem area in order to digest the "problem causes."
The key is that the mixed solution must come in contact with the urine in order for it to digest the urine. If there is residual urine that could not be reached by Odor Kill, it will not be digested and removed. So, it will be important to get the solution as deep as possible into and under the fabric and the urethane foam.
Mix it 10 parts water and 1 part odor kill in a clean spray bottle. Generously spray the carpet, top, sides, bottom, and interior. The enzyme solution is working when it has moisture. It stops working when it dries.
Keep the problem area moist by covering it with a damp towel that has been saturated with the mixed odor kill solution. Keep it on the area for 4-6 hours.
Let it dry and reapply if necessary. Another alternative treatment method: You need to rent a steam cleaner (that injects water under pressure).
You should mix 10 oz to 15 oz. of ATX’s Odor-Kill and Stain Remover to 1 gallon of warm water in the steam cleaner (this gives about a 1 to 10 ratio of product to water).
Then clean both sides of the carpet with the steam cleaner. If it is possible to get under the carpet, then clean that also. Generously, spray the carpet with the solution; let the area alone for a couple of hours and then repeat the process.
If ATX’s Odor-Kill and Stain Remover gets to the source of the problem, then this treatment will solve it. After drying, vacuum, and check for urine smell.
Re-apply if necessary. We also have directions on our site, which you can refer to. Just as a friendly suggestion, since you will have already rented the steam cleaner, you could clean other carpets in your home with ATX’s Odor-Kill and Stain Remover by using 2 oz. to 1 gallon of warm water (a 1 to 64 ratio).
Yes, we offer a money back guarantee for all situations and applications.
How do I remove SOFA Mold and Mildew?
SOFA Mold and Mildew.
Many thanks for your email. Odor Kill should do the job for you. It loves to digest mold and mildew. The key is that the mixed solution must come in contact with the mildew in order for it to digest.
If there is residual mildew that could not be reached by Odor Kill, it will not be digested and removed. So, it will be important to get the solution as deep as possible into the fabric and the urethane foam.
Mix it 20 parts water and 1 part odor kill in a clean spray bottle. Generously spray the sofa, top, sides, bottom, pillows, etc. If you can take off the pillow covers do that also.
Then rub it in with your hands and let dry slowly. The enzyme solution is working when it has moisture.
It stops working when it dries. After drying, vacuum, and check for mildew smell. Re apply if necessary. We also have directions on our site, which you can refer to.
How do I remove Tea and Coffee Stains in a Mattress or fabric?
Tea and Coffee Stains in a Mattress or fabric.
For the iced tea or coffee stain. Take it slow and easy. It may take a few treatments. Spray it on the spot let is sit for 1-4 minutes.
With a damp cloth, then blot up the tea/coffee and odor kill. You will want to do it from the outside of the stain to the inside.
After the first application, it may leave a ring since the tea/coffee will migrate to the outside.
Just treat it again and blot up the remaining stain. Also, you may get some staining from the mattress dyes, just keep slowly spraying and "feathering" out the stain so that it is not noticeable.
After stain removal, use a fan to dry out the spot and mattress padding. Also, Just follow the directions.
Back to the Main FAQ