FAQ Keyword Home

Back to the Main FAQ

How do I remove Cat Urine in Mattress / Sofas?

Cat Urine in Mattress / Sofas

Yes, it loves cat urine, but it will take some work. ATX’s Odor-Kill and Stain Remover must get to the source of the problem area in order to digest the "problem causes".

The key is that the mixed solution must come in contact with the urine in order for it to digest the urine. If there is residual urine that could not be reached by Odor Kill, it will not be digested and removed. So, it will be important to get the solution as deep as possible into the fabric and the urethane foam.

 Mix it 10 parts water and 1 part odor kill in a clean spray bottle. Generously spray the mattress, top, sides, bottom, and interior. The enzyme solution is working when it has moisture. It stops working when it dries. Another alternative treatment method:

You need to rent a steam cleaner (that injects water under pressure and then sucks it back up).

 You should mix 10 oz to 15 oz. of ATX’s Odor-Kill and Stain Remover to 1 gallon of warm water in the steam cleaner (this gives about a 1 to 10 ratio of product to water).

Then clean both sides of the mattress with the steam cleaner. If it is possible to get inside the mattress, then clean that also. Let the area alone for a couple of hours and then repeat the process.

 If ATX’s Odor-Kill and Stain Remover gets to the source of the problem, then this treatment will solved it.

Just as a friendly suggestion, since you will have already rented the steam cleaner, you could clean other carpets in your home with ATX’s Odor-Kill and Stain Remover by using 2 oz. to 1 gallon of warm water (a 1 to 64 ratio). After drying, vacuum, and check for urine smell. Re apply if necessary.

We also have directions on our site, which you can refer to. Yes, we offer a money back guarantee for all situations and applications. See the guarantee below.

How do I remove Mildew on foam Rubber Mattress?

Yes, we do have an idea, but it will take some work. ATX’s Odor-Kill and Stain Remover must get to the source of the problem area in order to digest the "problem causes".

If we understand the problem correctly, in our opinion, you need to rent a steam cleaner (that injects water under pressure and then sucks it back up). You should mix 10 oz to 15 oz. of ATX’s Odor-Kill and Stain Remover to 1 gallon of warm water in the steam cleaner (this gives about a 1 to 10 ratio of product to water).

Then clean both sides of the mattress with the steam cleaner. If it is possible to get between the carpet and liner, then clean that also. Also clean the floor where the mattress and plastic liner laid.

Let the area alone for a couple of hours and then repeat the process. If ATX’s Odor-Kill and Stain Remover got to the source of the problem, then this treatment will solved it.

 Just as a friendly suggestion, since you will have already rented the steam cleaner, you could clean other carpets in your home with ATX’s Odor-Kill and Stain Remover by using 2 oz. to 1 gallon of warm water (a 1 to 64 ratio). I hope this info. helps and we would appreciate if you could give us some feed back.

How do I remove Moth ball Odors in a Mattress?

Moth ball Odors in a Mattress

The key is that the mixed solution must come in contact with the mothball molecules in order for it to digest them. If there is residual mothball molecules that could not be reached by Odor Kill, they will not be digested and removed.

So, it will be important to get the solution as deep as possible into the fabric and the urethane foam. Mix it 10 parts water and 1 part odor kill in a clean spray bottle. Generously spray the mattress, top, sides, bottom, and interior.

The enzyme solution is working when it has moisture. It stops working when it dries. Another alternative treatment method: You need to rent a rug cleaner (that injects water under pressure and then sucks it back up).

You should mix 10 oz to 15 oz. of ATX’s Odor-Kill and Stain Remover to 1 gallon of warm water in the rug cleaner (this gives about a 1 to 10 ratio of product to water).

Then clean both sides of the mattress with the steam cleaner. If it is possible to get inside the mattress, then clean that also. Let the area alone for a couple of hours and then repeat the process.

If ATX’s Odor-Kill and Stain Remover gets to the source of the problem, then this treatment will solved it. Just as a friendly suggestion, since you will have already rented the rug cleaner, you could clean other carpets in your home with ATX’s Odor-Kill and Stain Remover by using 2 oz. to 1 gallon of warm water (a 1 to 20 ratio).

After drying, vacuum, and check for mothball smell. Re apply if necessary.

We also have directions on our site, which you can refer to. Yes, we offer a money back guarantee for all situations and applications. See the guarantee below.

How do I remove Pet (dog & cat) Urine in carpet?

Pet (dog & cat) Urine in carpet: Yes, Odor Kill will eliminate the urine odors. Just follow the directions: on the bottle, that are included and are on our web site. Yes, it loves urine, but it will take some work.

ATX’s Odor-Kill and Stain Remover must get to the source of the problem area in order to digest the "problem causes." The key is that the mixed solution must come in contact with the urine in order for it to digest the urine.

If there is residual urine that could not be reached by Odor Kill, it will not be digested and removed. So, it will be important to get the solution as deep as possible into and under the fabric and the urethane foam. Mix it 10 parts water and 1 part odor kill in a clean spray bottle. Generously spray the carpet, top, sides, bottom, and interior.

The enzyme solution is working when it has moisture. It stops working when it dries. Keep the problem area moist by covering it with a damp towel that has been saturated with the mixed odor kill solution. Keep it on the area for 4-6 hours.

Let it dry and reapply if necessary. Another alternative treatment method: You need to rent a steam cleaner (that injects water under pressure). You should mix 10 oz to 15 oz. of ATX’s Odor-Kill and Stain Remover to 1 gallon of warm water in the steam cleaner (this gives about a 1 to 10 ratio of product to water).

Then clean both sides of the carpet with the steam cleaner. If it is possible to get under the carpet, then clean that also. Generously, spray the carpet with the solution; let the area alone for a couple of hours and then repeat the process.

 If ATX’s Odor-Kill and Stain Remover gets to the source of the problem, then this treatment will solve it. After drying, vacuum, and check for urine smell. Re-apply if necessary.

We also have directions on our site, which you can refer to. Just as a friendly suggestion, since you will have already rented the steam cleaner, you could clean other carpets in your home with ATX’s Odor-Kill and Stain Remover by using 2 oz. to 1 gallon of warm water (a 1 to 64 ratio).

Yes, we offer a money back guarantee for all situations and applications.

How do I remove Smoke Odor Removal in Carpets?

Smoke Odor Removal in Carpets.

 Your carpet: Try to clean the obvious smoke stained areas with a mild soap cleaner. (You have already done this--good). This just cleans up the areas so those Odor kill molecules don't have to digest as many of the smoke molecules.

Alternative A: Mix it 20 parts water and 1 part odor kill in a clean spray bottle. (Don't use it in the concentrate form, it works faster mixed with water since the enzymes "wake up and go on the attack.") Generously spray the floor, carpet, top, sides, bottom, and the entire house interior. The enzyme solution is working when it has moisture. It stops working when it dries.

Also, you need to spray the mixed solution on all surfaces of the house, since the smoke odor molecules have migrated and attached themselves to all surfaces, walls, floors, carpets, drapes, cabinets, etc. How much to use? Depending on the size of your house and carpet. I would start with 2 quarts and perhaps you should get a gallon. Since it is a water-based product, you don't have to wear any masks or take any special precautions Just don't put it in your eyes or drink it.

Alternative application method B: You need to rent a carpet cleaner machine (one that injects water under pressure and then sucks it back up). You should mix 10 oz to 15 oz. of ATX’s Odorkill and Stain Remover to 1 gallon of warm water in the steam cleaner (this gives about a 1 to 10 ratio of product to water).

Then clean both sides, if possible, of the carpet with the cleaner. Generously inject the solution into the carpet. It must get to the pad. Do not vacuum it up. Let it dry slowly.

Close up the room so it will dry slowly. After drying, vacuum, and check for smoke odor smell. Re apply if necessary. We also have directions on our site, which you can refer to. If ATX’s Odorkill and Stain Remover gets to the source of the problem, then this treatment will solved it.

Just as a friendly suggestion, since you will have already rented the carpet cleaner machine, you could clean other carpets in your home with ATX’s Odorkill and Stain Remover by using 2 oz. to 1 gallon of warm water (a 1 to 64 ratio).

For general purposes, this is all you need.

How do you remove smoke in my home?

SMOKE Removal in Home:

Odor Kill can definitely be sprayed in a large room and it loves smoke odors. It must be sprayed on all water safe surfaces. The key is to get the Odor Kill solution in contact with the smoke molecules.

 Odor kill acts like little "pacmen" which attack and digest the organic matter. They work in the presence of food -- urine (organic matter), oxygen and water.

When the area dries the enzymes can not be regenerated and it must be re applied. You would not have to apply it every day. The Marriott Hotel Group uses Odor Kill to convert smoking rooms into non smoking room !

They tested us against every possible product on the planet and we were selected as the best. This product is being used in hundreds of rooms every day.

Check out the detailed directions for smoke odor removal at our web site listed below.

Back to the Main FAQ